Hinge pin for Flymo Turbo 400 lawnmower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement hinge pin for the Flymo Turbo 400 lawnmower. The original kept falling out so I designed this one.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
A replacement hinge pin for the Flymo Turbo 400 lawnmower. The original kept falling out so I designed this one.
Print Settings
Rafts:
No
Supports:
No
Resolution:
~0.2
Infill:
50% or more
Filament: any PETG or PC original is black
Notes:
Keep the orientation, no supports are needed.
This needs to be strong, so adjust the following setting in your slicer:
- Print slightly hotter than usual, in the top range for your filament
- Set wall thickness to at least 2 mm and add a lot of infill
Post-Printing
The part is slightly oversized, so you may have to tap it with a hammer to insert. This is intentional to prevent it from falling out like the original does.
Custom Section
The woderful picture is from the Flymo website with my edit ;)
Category: Parts