Case for MERG Ezybus Controller Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2 part clamshell case for the Ezybus controller module from the Model Electronics Railway Group (MERG)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 243
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
The Model Electronics Railways Group make and sell a range of self assembly electronics modules to operate model railway layouts and the associated accessories. The modules build as PCBs and the builder has to source an enclosure for their module themselves. The Ezybus system is an Arduino based bus control enabling multiple accessories such as points, signals, lights etc to be controlled using a simple 4 wire bus cable around the layout. This project provides an easily printed case for the system controller.
The project uses 4 x M3 x 10mm countersink head screws to fix the base and the lid together. The PCB is sandwiched between the lid and base on the screw posts.
The basic files provide a plain lid, files are also provided for a lid with an inlay that is more complex to print and requires a colour change within the first two layers.