Korg Volca stackable shroud style cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted a dust cover for my Korg Volcas - ended up with this thing where you can store them easily as a stack. There is…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 478
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
Wanted a dust cover for my Korg Volcas - ended up with this thing where you can store them easily as a stack.
There is no need to remove the shroud if you are using them. I found it convenient to leave them on as a hand rest and it also protects the knobs.
If you are more interested in a classic dust cover design there are also two alternatives.
All versions are a tight fit so they can't fall off easily.
The files:
Volca Cover stack - this is the main file. It is the stackable shroud.
Volca Cover stack lid - this is a lid to fit on top of the uppermost shroud.
Volca Cover - is a classic cover which needs to be taken off to use the Volca.
Volca Cover Frame - this just a cover frame. Cut or saw a small plate (e.g. wood) with the dimensions of the frame and glue in on top. This spares the IMHO awkward print of a large plate on the 3d printer.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
as you like
Notes:
Print as shown without support. Everything will be easy printable - even the cover stack lid should work well by bridging the gaps.
Category: Music