BCU-2 Unit from SCUM Game
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3in model of the BCU-2 Scum game and can be uses with LED lighting systems.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 140
- Wydruki
- 0
- Wyświetlenia
- 1008
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
May 27, 2022: Provided with permission from Leva Okapi (Gamepires). This is a fan made model of the BCU-2 Unit from the Scum Open World Survival game. It is not for sell or profit. No remeshing is authorized without contacting the creator of this model or Gamepires for permissions.
Printed model has a size of 3" X 3" X 3/4" (7.62cm X 7.62cm X 1.9cm).
You may have to download the files individually.
Recommendations for FDM Printers:
Print parts with tree supports on Super quality.
Print stand upright.
All other parts may be printed as is, again use tree supports.
For either model use a skirt or raft for bed adhesion.
Printer: Creality 6SE
Material: ERYONE Gray PLA filament
Recommendations for SLA/Resin Printers:
Print parts with a slight incline back. Place all support structs on back side where possible. Models can be printed without any islands if at the correct angle.
Printer: Elegoo Mars2 Pro
Material: Elegoo Gray Resin