Snapmaker 2.0 A350 HeatedBed Cable Protection Fence
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple fence to prevent the heatbed cable from getting caught behind the right linear actuator of the y-axis.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 936
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
After some time printing large models spanning the complete printbed, the cable of the heated bed got caught behind the right actuator of the y-axis.
This fence simlpy prevents this from happeningnot while being in the way and forcing new stress on the cable.
To counter any possible abresion of the cable while sliding along the fence you could use some PTFE adhesive tape.
Printed in default 0.3mm draft mode on my Prusa MK3S. As long as it does not deform by the heat of the linear modules, this will be printed in PLA.
Inspired by but not a remix of this model.