Coatrack using 22mm copper tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coatrack using a pair of triangular ends supporting a 22mm copper tube.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Coatrack using a pair of triangular struts supporting a 22mm copper tube which is pressed into both ends. Printed in Prusament Galaxy PLA with fuzzy skin. Looks good and plenty strong at standard Prusaslicer settings. Designed to fit the Mk3.
I can recommend to keep the length of the copper tube to a max of 2m as it will sag at heavy loads otherwise. I freshened up the copper tube before coating it with a clear lacquer to prevent it going brown quickly.
Apologies to our non-metric colleagues but I don't have an Imperial version. Remix as you please though.