Chess Figure Set Dubrovnik [Kingsize 3.86"] - mod easy-to-print [for a board with 58mmx58mm fieldsize]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chess Dubrovnik Set - mod easy to print Kingsize 3.86" (for a board with 58mmx58mm fieldsize) Chess #Dubrovnik #Stau
- Ocena
- 4,889 / 5
- Polubienia
- 57
- Pobrania
- 689
- Wydruki
- 13
- Wyświetlenia
- 2624
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Chess Dubrovnik Set - mod easy to print Kingsize 3.86"
(for a board with 58mmx58mm fieldsize)
Chess #Dubrovnik #Staunton
///////////////////////////////////////////////////////////////////////////////
The set - except of the knight - is a remake (redrawn in Fusion360) of the "Classic Dubrovnik Chess Set".
To make it 3D printable in an easier way, i slightly modified the overhangs with slopes at 50deg angles.
The print needs very few support material - you'll see.
The figures are hollowed out a bit to allow the insertion of metal rods or balls + resin.
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The Knight is from::
https://cults3d.com/en/3d-model/game/chess-set-dubrovnik-1950
Have fun!
///////////////////////////////////////////////////////////
https://www.paypal.com/paypalme/satch5150
///////////////////////////////////////////////////////////