Fluffy Ball v2 (more fluffy than original)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed Fluffy Ball! A cool toy for a X-mas tree, car mirror, or any place that lacks a useless dust collecting thing
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 378
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution
3D printed Fluffy Ball! A cool toy for a Christmas tree, car mirror, or any place that lacks a useless dust collecting thing
-Models must be combined in the slicer
-Good blowing for the bridges is necessary
-It is better to increase bridges flow rate
-Only flexible materials such as SBS or PETG should be used
-The layer thickness is 0.12 mm. Needle width 0.3, height 0.24 mm
-If slicing fails, try changing the extrusion width (reduce)
-To improve compatibility between bot_mor and bot_ten, you can use a parameter like XY Size Compensation/ negative Horizontal Expansion/ Other or reduce the flow for both
Please go to YouTube if that's not too much trouble ;) |