Glitter PVB vase in vase mode
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is modified vase I designed some month ago. Modified the size to the middle and material to PVB.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you are prefer, please print it!
This is the best setting for PVB. If you recommend another setting, please leave your comment and share your setting.
I print it by Prusa Mini+
If you use Prusa Mini, please use the gcode or slice with the 3mf file.
If you use another printer with Prusaslicer, please refer 3mf file.
If you use another slicer, I hope following could be helpful for you.
I changed the setting from the default of 0.2mm speed and prusamentPBV as follows;
Layer height: 0.15mm, First layer height: 0.3mm
Variable layer height : quality/ speed 0.5, radius 5
Spiral-vase: on
Horizontal shells solid layers bottom: 7
avoid-crossing-perimeters: on
seam position: rear
speed for print moves external perimeters: 30mm/s
extrusion width external perimeters: 0.6mm
temperature nozzle first layer/ other layers: 220 degree
Happy printing!