Raspberry Pi and Camera holder for K8800
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my design to mount a raspberry 3 with camera to my 3D Printer (Velleman K8800). The camera can be oriented by…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is my design to mount a raspberry 3 with camera to my 3D Printer (Velleman K8800). The camera can be oriented by the loc-line. There are two types of loc-line, the normal one and the one with a mount for the camera cable.
For better printing the locline and the raspberry pi holder and camera lid are seperate parts to be glued together. I also added a helper part, which makes it easy to assemble the loc-line with a plier.
Used the Loc-Line from https://www.thingiverse.com/thing:9006.
Holder inspired by https://www.thingiverse.com/thing:2982981.
Print Settings
Printer:
Vellemann K8800
Supports:
No
Resolution:
0,2
Infill:
20%
Category: 3D Printer Accessories