1 / 3
Zip tie attached hose holder for the FX 4 Stage PCP Air Pump or identical Gehmann M100 4-Kolben Pressluftpumpe — zdjęcie 1
1 / 3

Zip tie attached hose holder for the FX 4 Stage PCP Air Pump or identical Gehmann M100 4-Kolben Pressluftpumpe

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Zip tie attached hose holder for the FX 4 Stage PCP Air Pump or identical Gehmann M100 4-Kolben Pressluftpumpe

Ocena
0 / 5
Polubienia
8
Pobrania
49
Wydruki
0
Wyświetlenia
466
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Zip tie attached hose adapter for the FX 4 Stage PCP Air Pump or the identical Gehmann M100 4-Kolben compressed air pump. The hose holder can also be mounted without a cable tie, but then it might slip.
The adapter should fit all pumps with a pipe diameter of 28 mm. The inside diameter of the adapter is 27.8 mm.

— I would be very happy if you have as much fun with the things as I do. — 

 If you like :-) Thank you very much!

— German desription — 

Mit Kabelbinder befestigbarer Schlauchadapter für die FX 4 Stage PCP Air Pump oder baugleiche Gehmann M100 4-Kolben Pressluftpumpe. Der Schlauchadapter kann ggf. auch ohne Kabelbinder montiert werden, rutscht dann aber etwas.
Der Adapter sollte an alle Pumpen mit einem Rohrdurchmesser von 28 mm passen. Der Innendurchmesser des Adapters ist 27,8 mm.

Tagi