The Perfect Filament Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple filament clip, easy to print and weight only 1g
- Ocena
- 4,852 / 5
- Polubienia
- 258
- Pobrania
- 2832
- Wydruki
- 77
- Wyświetlenia
- 9146
- Oceny
- 61
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Finding a filament clip should be easy for such a small piece of plastic. But after almost 2 years of 3D printing I didn't find the best one so I made The Perfect one :). My requests was:
- no side mount of the spool - will eventually break the zip begs
- no filament bend - hate this
- easy to print with less material
- sort of snap fit for the filament
I was inspired by this but I start from scratch adding some edges to the original idea for the filament to snap fit. This is my “Hello World” project in Fusion360.
Print info: 0.2mm layer or lower, 3 perimeters. Print one for test: if is too tie or too loose play with the flow. Different filaments have different tolerances.
I printed in PLA CF and tested with spools of PLA, PETG, FLEX, but I highly recommend to print in a tough material like PLA+, PETG or even better to reduce wear and tear.