Ventilation duct knees for Europlast flat system (220x55)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Different angle/radius knees for Europlast flat ventilation system (220x55).
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 692
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Since Europlast flat ventilation system (220x55) offers quite limited range of knees and missing some quite essential (45 degree) ones, I decided to make some custom parts. I added some air guides for quieter operation and extra strenght.
Custom angles/radiuses avaliable on request.
Due to the size and printability, knees are divided into two identical parts that are later epoxied or superglued together.
Recommended material is PETG. ABS would be also OK, but printing large thin objects may be a challenge. PLA is not reccommended due to the low deformation temperature.