Ceiling mount for a bush cutter (or bicycle)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a ceiling mount for my bush cutter, but I think you can use it for a bike too if you use a stronger filament.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed a ceiling mount for my bush cutter, but I think you can use it for a bicycle and other long small devices too, if you use a stronger filament type. I use PLA which works fine for my use-case.
To start this design project I don't want to re-invent the wheel so I use the Prusa pulley (73671). In the ceiling mount you can use the wheel and shaft which are part of 73671 (3x) and the object ‘PCBCF Prusa Pulley_ALL PARTS.3mf’ 2x. To make life easy for me I use the same ceiling mount for both parts, but replace the wheel/shaft with an screw only to hold the fixed end of the rope with the eye splice.
To get a stronger object I print it upright and add a massive infill every 20 layers.