1 / 2
Rubber Feet for PrintDry Pro Filament Dryer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part for the PrintDry Pro
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 20
- Wydruki
- 1
- Wyświetlenia
- 197
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
For reasons unknown, I keep losing the rubber feet on the bottom of my PrintDry Pro box when moving it between printers. Here's a replacement for them. I printed a set with Overture TPU, 0.3mm layer height, 2 perimeters. They're VERY tight—remember…losing them… I squeezed them a bit and then tapped them in with a mallet.
If you like what I'm doing…
… consider buying me a coffee or joining my Club.