1 / 1
E1 Motorcycle bluetooth intercom/communicator holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a mounting plate for the "E1" style of motorcycle communicator systems that can be found at the usual suspect websites. I purchased one recently however since I have 2 helmets I use, I needed an extra. I attached the Fusion file so you can modify it easier if you need to.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
Doesn't matter (I used 0,28)
Infill:
Doesn't matter
Notes:
If you have problems with the edges lifting use a raft or brim. Relatively quick and easy print. I used 0.28mm layer height with 45% infill but that shouldn't matter much.
Category: Automotive