ProMega Filament Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Filament Spool Holder replacement for the ProMega. It uses PVC pipe together with some 3D printed parts to…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Filament Spool Holder replacement for the ProMega. It uses PVC pipe together with some 3D printed parts to hold the spools and is a drop in replacement for the current spool holders, using the same mounting points and screws/nuts.
The filament guide is designed to eventually feed into a top cover with filtration and bowden tubes. For now, I just have two bowden tubes attached to the filament guide and then loosely zip tied together at the top of the arch to keep the tubes from collapsing onto the print.
Print Settings
Printer:
M3D ProMega
Rafts:
No
Supports:
Yes
Resolution:
0.3mm layer height
Infill:
10% Rectilinear
Filament:
Inland PETG
Black
Notes:
Support is only needed for the cut outs of the flange. The left and right arm and flange are identical. The middle arm is best printed with the long edge going left to right.
Category: 3D Printer Accessories