New England Patriots Table Center Piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a table center piece I made for Superbowl LII. It prints in 4 separate colors and assembles by snapping the…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 107
- Wydruki
- 1
- Wyświetlenia
- 535
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a table center piece I made for Superbowl LII. It prints in 4 separate colors and assembles by snapping the pieces into the blue main part. Tolerance used is 0.3mm. Meant to be printed in 0.2mm
Print Settings
Printer:
Creality CR-10
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
10%
Notes:
I printed this with 8 bottom and top layers since some of the parts will print over the infill and would otherwise print in mid air.
This was done in Fusion 360 based off of SVGs from the internet.
Custom Section
Render in Fusion 360
Main part printed
All the parts assembled
Category: Decor