Azul Overlay - fits smaller build surface
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First of all, thanks to jacquesuk for creating this overlay, it looks and works great! This is a remix of the original…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 137
- Wydruki
- 1
- Wyświetlenia
- 895
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
First of all, thanks to jacquesuk for creating this overlay, it looks and works great!
This is a remix of the original design fitting a smaller build surface than 233x233mm. This is achieved by splitting the piece and adding dovetail connections (like for the clips) to connect the top and bottom part. The minimum required size of the build plate for this remix is a width of 233mm and length of 156mm. This makes the remix printable with the Prusa MK3(s)(+), amongst many printers.
You will need to print 4 clips, one for each corner of the board.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
15% (rectilinear)
Filament: 123-3D PLA Neutral
Notes:
Print Clips with 3 Bottom layers, 2 top.
Print Board with no bottom and top layers, only infill.Wall line count: 2 (0.8)
The STL files are face down, this will ensure a nice smooth top layer.
Category: Toy & Game Accessories