Husqvarna open-toe foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an open-toe foot for the Designer series Husqvarna sewing machines.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is an open-toe foot for the Designer series Husqvarna sewing machines. It will probably work with other Husqvarna machines as well.
I printed it sideways with support and a raft so the mounting pin would come out round and clean.
Edit 11/14/2015
I discovered that the clearance between the mounting pin and the top of the foot was too tight to print reliably, so I moved it a millimeter or so. Now it prints much more reliably. and still works great on the machine.
I also added a second file that has 'helper disks' from Makerbot Desktop added to it so it will print laying flat without a raft. The helper disks are much easier to clean up after than a raft, and seem to work just as well in this case.
Print instructions
Post-Printing
If you print it on it's side, there will be more cleanup of support material.
You will probably need to sand the toes a bit so they don't snag on the material while sewing.