Golf Tee - Asymmetrical Flat Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Golf tee printed flat with no support for more durability
- Ocena
- 4,647 / 5
- Polubienia
- 177
- Pobrania
- 2077
- Wydruki
- 16
- Wyświetlenia
- 5868
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I want to say this is a pretty standard golf tee, just it is asymmetrical to be printed flat. This should help strengthen the tee due to the lengthwise layer lines.
Disclaimer: I'm not the golfer, I was making golf things for my dad, and most tees I found were printed upright, but due to the layer lines they were very brittle and break easy. The flat print normal tees I found require supports which seemed like a waste for such a small thing.
So, I made this flat print asymmetrical design to hopefully be stronger and last more than one swing, but again, I'm not the golfer and have not tested them. I know they hold a ball just fine and will stick in the ground.
I will update once I get some feedback how they do.
I used 3 walls and a high 90% infill going for strength with just a little flex. No support, no brim.
PETG would do even better.
Update: Version 1.1 has minor improvements to the base and added a long version.