1 / 4
T6 Intel Compute Stick case for active cooling
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the T6 Intel Compute Stick knock-off for conversion to active cooling.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 956
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I got this “T6” Intel Compute Stick knock-off that was overheating to a point where it was useless. Sadly there are no fan connectors on the board or I could have created a more clean design.
Having to resort to using the USB port for powering a fan, I designed the case to hold the PCB, heatsink and a 50mm fan.
I got the fan for 3€ from Amazon so overall this was a cheap and VERY effective upgrade. The Compute Stick runs constantly at 35°c now.
No supports. Print with PLA (can warp) or better PETG.