Star Wars Naboo S5 Blaster
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Star Wars S5 Heavy Blaster that appeared in both Episode i and II I was surprised by the lack of models…
- Ocena
- 5 / 5
- Polubienia
- 250
- Pobrania
- 559
- Wydruki
- 2
- Wyświetlenia
- 4416
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the Star Wars S5 Heavy Blaster that appeared in both Episode i and II
I was surprised by the lack of models and pictures available for this model.
While searching for reference material for this I did find out the original prop was made using a Feinwerkbau Model C55 airsoft pistol.
The only hardware you would need to build this are 2x M3 20mm screws to connect the bottom piece of the grip.
I modeled it like the original air soft so the bottom can slide up and down for better comfort.
If you cant get the screws I did include a model of them you can try and print.
You should be able to orient most pieces to need little to no support.
For the wall brackets I used the picture hanging strips that you can peel away
Support me on Patreon
Print instructions
Most parts should be support free.
Assembly Video