Prusament Spool Desiccant (Silica Gel) Container with Hydrometer (or without) Lid Only REMIX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have remixed the lids by slavearm https://www.thingiverse.com/thing:4508179 as the desiccant containers would fall…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 65
- Wydruki
- 1
- Wyświetlenia
- 954
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I have remixed the lids by slavearm https://www.thingiverse.com/thing:4508179 as the desiccant containers would fall into the middle of the spool if you were not holding them in the vertical position
Additionally I made the non hydrometer lid the same depth so that the bottom side of the container is captured by the spool.
Printed in clear PETG, this way i can see the colour of the desiccant and place it directly into the filament dryer whilst printing or to dry out the desiccant as required.
Category: 3D Printing