Halot One vat cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in place hinged vat cover, printable on the Halot One itself. I've included cxdlp so you don't need to slice it…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 144
- Wydruki
- 0
- Wyświetlenia
- 1025
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Print in place hinged vat cover, printable on the Halot One itself.
I've included cxdlp so you don't need to slice it again... just load the cxdlp straight onto the printer. This is 5% oversize in all dimensions, because my first print shrunk by that much. If you're not getting that much shrinkage, you may want to scale it down a bit.
I did need to cut the screw slots deeper... just ground them away against a drill bit in a drill press. Some-one may want to modify the design for that. Or I may do... it's currently a bit fiddly getting it into place.
Print Settings
Printer Brand:
Creality
Printer:
LD-001
Rafts:
No
Supports:
Yes
Resolution:
.050 height is fine
Filament:
eSun standard resin
black
Notes:
There's a .5 mm gap between parts, which works fine. .2mm is too small.
It's a 9 hour print because of the height.Post-Printing
The 2 parts should be separate. If not ease them apart with a scalpel or razor blade.
How I Designed This
I designed this based on https://www.thingiverse.com/thing:5277874 but really started from the ground up.
I use OnShape.com for my design work, and you can find my design at https://cad.onshape.com/documents/4dc9d5a0baed71909fb0590f/w/9d1c97abe83db2a9bf5c6150/e/180d667bf18afcd894e93bfe or search the Public spaces for "Halot One Vat Cover"
Category: 3D Printer Accessories