"Driveway" for Robot mower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A driveway for a robot mower to prevent the wheels digging holes in the grass.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 1690
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The first year I noticed that sometimes robotic lawn mower would get stuck at the entrance of its charging lair and the wheels would dig a hole. After that season there was no grass anymore in front the lair. I heard similar stories of friends and they didn't even have a lair but holes before the charging stations non the less.
So I designed a driveway. The honeycomb structure is strong enough to tap in the ground with a rubber hamer (don't over do it off course).
2-3 perimeters with a 0.4mm nozzle, no infill. Just scale it so it fits your printer.
I printed 4 pieces of driveway in light green PETG. It is almost invisible and grass is growing in front of the lair again.