1 / 2
Oddish Planter Eyesmile drain with holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Oddish Planter Eyesmile
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 351
- Wydruki
- 2
- Wyświetlenia
- 1264
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (55)Powiązane
Hi, this is just a remix of the magnificent work done by the original creator.
I've just add some holes on the bottom of the pot to drain the excess of water (when the pot is in the exterior)
- I've printed in 0.28 layer Hight.
- No supports at all.
- infill 10%.
- Printer: Artillery Hornet.
- Filament: PLA (Brand 3N3)
- Filament used: 43 g
- Time: 2H 30 m
- Bed: 60 cº
- nozzel: 0.4
- nozzel temp: 205cº
Spanish:
Hola, esto es solo un remix del magnifico trabajo realizado por el creador original.
Solo he añadido unos agujeros en el fondo de la maceta para que drene el exceso de agua (cuando la maceta está en el exterior)
- He impreso en 0,28 capas de altura.
- No hay soportes en absoluto.
- relleno 10%.
- Impresora: Artillery Hornet.
- Filamento: PLA (Marca 3N3)
- Filamento utilizado: 43gms
- Tiempo: 2H 30m
- Cama: 60 cº
- boquilla: 0.4
- temperatura de la boquilla: 205cº