Cord Wrap and Plug Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An cord wrap with a built in plug holder that can be attached to small appliances for cord management.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 123
- Wydruki
- 1
- Wyświetlenia
- 534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Ever struggle with how small appliances rarely have built-in cable organization or management solutions? That's the issue that I ran into.
I designed this to accomondate the standard sub-1m ungrounded power cable that are used by many small appliances. After wrapping the cord around, two-prongs at the top of thge holderare to be used as a two-prong plug holder.
Printed on Ender 3 v2 on standard PLA with 20% cubic infill. Recommend printing on its side to minimize supports and ensure that layers run along the prongs for maximum tensile strength.