Tomato / Vegetable Garden Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple PETG-friendly printable clip for training/staking tomato or other garden plants.
- Ocena
- 5 / 5
- Polubienia
- 206
- Pobrania
- 1512
- Wydruki
- 9
- Wyświetlenia
- 5826
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
An inexpensive clip for cage/string training tomato plants or other garden plants. Designed to be printed in PETG or other outdoor-friendly filaments, the 100% size is ~25mm in diameter once printed and clipped closed, and can hold tight on the hinge side to a twine/string to hold itself in place if you're not using tomato cages.
Also included is a pre-scaled 150% version, which prints at ~35mm in diameter and is suitable for larger vines or for clipping against vertical posts or wire tomato cages.
Version 7 model updates:
- Tighter tolerances on the clasp for more holding power,
- Stronger design around the male and female ends of the latch, and
- Reduced need for supports on the male end of the latching mechanism for better consistency in print quality
Photo above shows:
- 150% version (using original v4 model)
- Printed in purple MH Build PETG,
- 0.2mm layer height
- Supports on, due to the offset of the male end