Shopping list fridge magnet (print in place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shopping checklist for basic staple foods.
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 919
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Shopping checklist for basic staple foods.
It is print in place, but I had to use supports , only to support the tags down the edge.
From the top the Items in the list are Milk, Sugar, Butter, Eggs and Bread. Just incase my illustrations weren't that clear, the Wife thought the butter was cheese incidentally.
To free the tabs off , I just wiggled them until I heard them release with a worrying snap but it was fine , just don't be too heavy handed, although I had to apply some force to initially push the tabs out, but once out I slid them in and out a few times more and it was good to go.
The version in the photo had a slight error , if you look close enough the buttons are off centre, this has been corrected in the uploaded version.
There are slots for 7 magnets on the back, but as it turned out, I only needed 5, the extra 2 are optional.
These are the magnets I used (8mm diameter , 3mm height).
https://www.amazon.co.uk/gp/product/B07JHQNDZC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I paused at height to add the white . In Cura it showed the layer to pause at would be 35 at 0.2mm layer height , but as you see I still got it wrong , if I print again I think I will do all one colour and paint it.
Hope its to use to someone , if not, it was fun making it , even if it took me 3 attempts to get it right :).
Happy making.
Cheers