17.5mm (11/16") laminated particle board pass through swivel for filament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Swivel pass through for filament into particle board lid of an enclosure.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of the following:
https://www.thingiverse.com/thing:1510144
IKEA Stuva enclosure porthole pass-through (with swivel filament guide)
by buddyO
I had already built my enclosure for Anet A8 out of laminated particle board. I wanted to start using it as a heated chamber, and have the filament spool outside of the enclosure.
The IKEA model was for a much thicker design, I needed it to work with 17.5mm or 11/16" laminated wood.
I cut the swivel component, and bottom piece. Top is untouched from original design, and has been included for easier download.
Please refer to buddyO’s design for further details on the install.
I used Red and Green PETG filament 25% Gyroid Infill.
For reference the spool holder is here:
http://www.thingiverse.com/thing:3227387