Lego Model Stand Shorter Arm (X-Wing 75102)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
X-Wing Stand with adjusted angle and height. Stands 295mm tall with model.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 218
- Wydruki
- 7
- Wyświetlenia
- 2762
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The original is very well designed and perfectly balanced. I couldn't fit the X-Wing on my shelf with the foils deployed so I remixed the arm.
With the modified arm everything now stands 295mm tall with X foils extended.
The arm is slightly shorter and the angle is reduced by 7.5 degrees. Everything else remains unchanged.
Remixed by adjusting the original drawing/sketch by quantumwhistle in Fusion 360 Hobbyist.
Print Settings
Printer:
Anycubic Mega X
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament:
3D Fuel PETG
Midnight Black
Notes:
The models lowest wingtip sits at about the same height as the original. The highest point with the remixed arm stands 295mm high.
How I Designed This ===================
Fusion 360 Sketch
I adjusted the original sketch by quantumwhistle in Fusion 360. Reduced angle by 7.5 degrees and lowered arm mounting point slightly.
I'm a novice Fusion 360 user
Category: 3D Printing