Gardena garden hose ends (North American GHT)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick connect hose ends.
- Ocena
- 5 / 5
- Polubienia
- 99
- Pobrania
- 875
- Wydruki
- 7
- Wyświetlenia
- 3204
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
I was never sure from other similar models out there from the descriptions if they would work with North American hoses. I printed quite a few and was disappointed that they were European or British threads. The thread used in North America is strange and isn't found very often outside of garden hoses and sprinklers. It is called GHT (garden hose thread) or ¾" NH (national hose). I modeled these parts in Fusion 360 with a pair of cheap calipers off a real part. I found the GHT .xml file and saved it to my ThreadData directory. If you decided to make your own, be careful, there are a few files out there for GHT which are slightly incorrect which is the reason why my version numbers are not v1. The one I finally found that was correct was over on Thingiverse with instructions on how to load it to the proper folder location.
Use Gardena O-rings.