NCS314 Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
So I had this clock for about a year, but just bare PCB wasn't really suitable for display purposes.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 367
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
So I had this clock for about a year, but just bare PCB wasn't really suitable for display purposes. So it seemed like a problem my printer could solve!
This item prints in two pieces, the bottom contains the actual clock, and the top piece sits inset in the bottom piece.
The bottom does require 4 x m3 screws to hold the clock in.
If you print it I hope you enjoy it!
Print instructions
Category: DIY Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Filament: AmazonBasics PETG Black
Notes:
PLA would probably work for this, but the bottom of the arduino does get quite warm so I opted for something a little less susceptible to heat.