Pololu Voltage Regulator Case and Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this case and lid in Fusion 360 to mount my Pololu buck converter so I could power my Raspberry Pi 4 from…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 1166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I designed this case and lid in Fusion 360 to mount my Pololu buck converter so I could power my Raspberry Pi 4 from the Prusa's power supply. I tried using https://www.thingiverse.com/thing:4068417 but it didn't fit the Pololu I actually ended up getting. I designed mine based on that one but added a lid.
It seems that the Pi 4 may have slightly higher current requirements so I wanted to get a more capable regulator and got this one: https://smile.amazon.com/gp/product/B01M659ER2/ref=ppx\_yo\_dt\_b\_asin\_title\_o09\_s00?ie=UTF8&psc=1
The Pololu board is held on using M2x8 screws and the lid is fastened with M3x10. There are enough of these in the spare parts bag that comes with the Prusa i3 MK3S kit to use for this.
This is my second design from scratch ever, in Fusion 360 so It's not great, but it worked for me and I thought I'd share.
Print instructions
Category: Electronics Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 15%
Filament: Overture PETG Black