Helmet Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a quick helmet stand so I decided to design a simple one myself. This one has a hollow bottom part so it can…
- Ocena
- 5 / 5
- Polubienia
- 80
- Pobrania
- 449
- Wydruki
- 12
- Wyświetlenia
- 2057
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a quick helmet stand so I decided to design a simple one myself. This one has a hollow bottom part so it can be filled with sand or some other medium to weigh it down.
One thing I should have designed around was the fact that I ended up putting some padding on top of the stand, but it will not be visible when in use so it doesn't really bother me.
The head-part is 150mm tall, and there are different heights available for the foot so it will fit more helmet sizes.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
5%
Filament: 3d Prima PLA Gray, red
Category: Organization