Launcher Backpack - Scrambler (2015 Science Olympiad)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts to launch the ETV (Egg Transport Vehicle) for the 2015 division C Science Olympiad, Scrambler. It should be…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 602
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
Parts to launch the ETV (Egg Transport Vehicle) for the 2015 division C Science Olympiad, Scrambler. It should be fully rules complaint but check dimensions before using this design.
2015/2016 redesign: To make it easier to launch the cart using a large overhead pulley I created a new topper for the Launcher Backpack known as the Football Launcher (because it reminded me of a set of goal post). I have also created a smaller version of the backpack itself to save print time and plastic. The Lite version of the Backpack Launcher should not perform any different the the old longer version.
Note: At time of upload, the design has not been tested in competition and has no guarantee of performance.
Instructions
Printed Parts needed:
1x Launcher Backpack Pt 1
1x Launcher Backpack Pt 2
=====================================================
Other parts needed to build the cart:
1x Makerbeam Extruded Aluminium Beams (150mm used in pictured cart): http://www.amazon.com/MakerBeam-150mm-beam-black-anodised/dp/B00G2DNT4I/
16x M3 6mm Bolts: http://www.amazon.com/MakerBeam-bolts-square-head-pack/dp/B00G2DNW3G/
or http://www.amazon.com/MakerBeam-bolts-wing-type-head/dp/B00G2DNWK4/
16x M3 Nuts: http://www.amazon.com/gp/product/B000NBIH92/
=====================================================
Category: Engineering