Giant Lego inspired Minifigure : Ponko Punk Rocker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Giant Ponko is an animated minifig scaled to 10x normal size (based on Lego Serie 4 Punk rocker minifigure).
- Ocena
- 4 / 5
- Polubienia
- 161
- Pobrania
- 484
- Wydruki
- 6
- Wyświetlenia
- 4468
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
Giant Ponko is an animated minifig scaled to 10x normal size (based on Lego Serie 4 Punk rocker minifigure).
Ponko plays music when you push guitar's buttons.
- Body back receives 2 servomotors like MG90
- Neck receives 1 servomotor like MG90
Body_Back receives 1 RPi
The two parts of crest must be glued.Bottom and middle of the head must be glued.
If you don't want to use servomotors, you can print "NOServo" parts instead of "Servo" parts.
All parts are fixed with M3 bushes and screws.
Electric guitar STL files are here : https://www.prusaprinters.org/prints/21724-electric-guitar-for-ponko-giant-lego
Code for this giant project is available on Naoned Makers Github : https://github.com/naoned-makers/ponko
Print instructions
Category: Construction Toys Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes for some parts
Resolution: 0.20
Infill: 10
Filament: PLA Dailyfil Pink and Blue + Formfutura Black + Fiberforce Yellow