1 / 4
Dog AirTag Collar remix - Easier to print with F3D file
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made some modification: tighten tolerances around hex nuts reduces bulk of back (to avoid back pressing on dog) made…
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 357
- Wydruki
- 5
- Wyświetlenia
- 1400
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 5) (Komentarze: 7)Remiksy (1)Kolekcje (50)Powiązane
Made some modification:
- tighten tolerances around hex nuts
- reduces bulk of back (to avoid back pressing on dog)
- made it easier to print (see image for recommended print orientation)
- tighter fit to my pup's Julius K9 harness.
- matched the curve radius of top and bottom, they did not line up.
I'm also including the F3D so you can edit it easily for other collar widths.
See the images for print orientation. As long as your printer is tuned to do bridging it should come out well. Even if it doesn't the surface will be hidden.
Category: Pets