1 / 4
Porsche Macan Brake Caliper Cylinder Plug
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tiny plugs to prevent paint from getting into the brake cylinders.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
My friend and I designed this after I painted my Macan calipers red to go on my mk7 GTI and had to basically avoid the area around the cylinders for fear of getting paint into them.
They're designed around the width of electrical tape; you can add as much as you feel is necessary to make the fit snug. I only needed one strip around the entire diameter.
Since all four pistons are 42mm, you can just print as many of these as you need. I printed mine at .20mm (quality) on a Prusa Mini using PLA, and they came out perfectly.