Bracelet Bending Block
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracelet bending block to bend flat strips of metal into cuff-style bracelets. The larger circles are for a…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 594
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a bracelet bending block to bend flat strips of metal into cuff-style bracelets. The larger circles are for a wider, bend in the middle and the smaller circles are to introduce the bends on the ends to wrap around the wrist.
I made this block the same dimensions as a few you can find on Amazon. Obviously it's quite large. For the project I just did the band was only ½" wide so I made a much smaller one to save on printing time. If you're doing a small bracelet as opposed to a wide cuff you might want to make all items a bit shorter to avoid printing the whole thing.
You can find videos of this process on YouTube.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select Plus
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
Gradual Grid
Filament: Monoprice PLA White
Notes:
Filament type probably isn't important as it only needs to withstand loads from the walls, which are designed purposefully thick.
Sanding/Smoothing
It might be necessary to sand or otherwise smooth the surface of the dies. Softer metals might pick up an imprint of the layer lines if they're pronounced.
Category: Hand Tools