1 / 1
CTC V6 Single Mount with PINDA Probe Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As always I wanted to add a PINDA probe, I started by trying to make a drop in adapter but that was not a very good…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
As always I wanted to add a PINDA probe, I started by trying to make a drop in adapter but that was not a very good solution due to not having a good spot for the cable. So I mixed this guy up. Print it the same as the org model, fan down with support on build plate.
Print Settings
Printer:
CTC w\ Single V6
Rafts:
No
Supports:
Yes
Resolution:
0.20
Infill:
60
Filament:
eSun PET-G
Gray
Notes:
I do lower fan speeds, but still turn it up for bridges.
Category: 3D Printer Parts