Over-engineered Apple Airtag keyfob/ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Over-engineered the Apple Airtag keyfob/ring because the others I found and used kept on breaking.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 950
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- GNU General Public License v2.0
Over-engineered Apple Airtag keyfob/ring.
Designed for use with a 30 mm keyring (others will still fit)
I left one side open (the white side of the Airtag) so the pinging sound gets less muffled.
Parts needed:
- 5 x M2x6 Socket head bolts
The bolts will screw into part 1, no need for tapping threads.
I printed in Extrudr XPETG CF, just because I like the finished surface texture. This is not necessary at all and the parts can be printed in any material. Use supports only on the bed, do this only if your support settings are good. If not, just print without supports.
This model is offered free of charge, but you can always support my work and buy me a coffee ;)