NA Miata Window Guide Roller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Window guide roller replacement for NA Miata (1990-1997)
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 224
- Wydruki
- 0
- Wyświetlenia
- 931
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by https://www.thingiverse.com/thing:4769678 and made before I knew https://www.thingiverse.com/thing:1612914 existed. Designed in Fusion360 after measuring with digital calipers and a few test prints/fits for dimensions.
USE PETG! PLA will deteriorate quickly with the heat.
Highly recommend 100% infill with 4 perimeters. Infill is tweakable if you really care but I wouldn't print less than 4 perimeters.
You can print without supports, just use a razor blade to trim the hanging material. The bolt head should press fit perfectly into the indent.