Tolerance Calibration Cube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The tolerance calibration cube is 10x10x10mm and test tight tolerances of .06mm .08mm .1mm and .12mm. It also has two…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 879
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
The tolerance calibration cube is 10x10x10mm and test tight tolerances of .06mm .08mm .1mm and .12mm. It also has two holes, one on each side that test 25% of model scale and 50% of model scale. These holes serve to test overhang. The cubes also have both inset text as well as extruded text. Keep in mind that if you scale this cube the tolerance will scale with it. at this point you can calculate the tolerances by their percentages with the .1mm being 1%.
Tolerance scale example:
.06mm = 0.6%
.08mm = 0.8%
.1mm = 1%
.12mm = 1.2%
5mm square hole = 50% model size
2.5mm square hole = 25% model size
designed by Grayfaux
Enjoy!
Category: 3D Printing Tests