Prusa Mini Z-axis support to use camera mount simultaneously
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a REMIX of the Z-axis brace by Fada to escape from interfering to a camera mount.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 490
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a REMIX of the Prusa Mini Z-axis support brace by Fada to escape from interfering to a camera mount.
Target camera mount is “Fixed Prusa MINI+ Printbed Camera Mount - Correct Hole Position” by kentnek.
https://www.printables.com/model/67767-fixed-prusa-mini-printbed-camera-mount-correct-hol
The thickness was reduced from the original design of Prusa Mini-Z-axis support. On the result, camera mount doesn't interfere to the Z-axis support during printing.
I tuned support setting for Prusament PETG. If you'd like to print in another PETG, please tune the setting by using this model.
https://www.printables.com/model/184006-support-test-with-sphere-shape-for-petg
Enjoy printing!