Lucky C-3PO
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal C-3PO skin for Soozafone's Lucky 13. Head, chest, abdomen and shoulders.
- Ocena
- 5 / 5
- Polubienia
- 396
- Pobrania
- 1012
- Wydruki
- 14
- Wyświetlenia
- 5226
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the droid you're looking for!
Minimal C-3PO skin for Soozafone's fantastic Lucky 13 armature.
Remixed from the original Lucky 13 skin files in 3ds Max and Zbrush.
No supports needed, but the head is a two-part print. Use CA glue to join the two parts. There are holes for alignment. Insert a short piece of 1.75mm filament to help aligning the parts correctly. Print the head at 0.1mm for best details, the rest of the parts should be printed at 0.15mm.
I also include a shorter neck armature piece that works better with this head.
In lack of any proper gold filament I've printed everything in yellow, except for the abdomen and the abdomen armature piece which are printed in grey. Of course you can go full sequel and print an arm in red if you want to.
The rest of the parts are found in Soozafone's Lucky 13 Model, so you will need to print the armature and skin pieces (except head, shoulders, chest1 and abdomen) from that: https://www.printables.com/model/148367-lucky-13-printable-jointed-figure
Gcode for the Mini included for timing and so on, but slice your own for best results.
Get my other skins here:
Stormtrooper: https://www.printables.com/model/199583-lucky-stormtrooper
Vader here: https://www.printables.com/model/172706-lucky-vader