1 / 1
Pistol Empty Chamber Indicators
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A few various sizes of basic Empty Chamber Indicators. I printed with and without supports, and the files should be in the orientation I printed them at. I do think you get better bed adhesion on the plugs if you use supports and would recommend using them. Infill is your choice, I tested from 13 - 43% and they all seem about the same.
Working on some other designs but so far they are only feasible when printed with flexible filament. Any thoughts or suggestions are welcomed.
I have tested in both TPU and ABS but don't see why PLA would not work just as well.