Modusworks Rapt V2 parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are inserts and a replacement damper for the Modusworks (MW) Rapt V2 Slider
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 1272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
After receiving my Rapt V2 slider, I was looking to make it slightly quieter. I designed these to be printed out in TPU at .2mm. With the maker's approval, I'm posting these here for others to print out at home.
There are 2 styles of inserts provided, one with the damper and one without. The one without the damper clicks more and allows the magnets to move. The one with the damper makes the magnets slightly weaker and prevents the magnets from moving at all. I recommend doing an exposed infill on the top for a cool look like the picture!
The third file, the damper, fits any Rapt V2 body and is a direct replacement for the rubber/foam dampers that are provided upon sale. It is simply just a cutout that acts as a spacer/click deadener. This is a quick, 2 layer print at .2mm layer height.
Do not overstuff your Rapt, if you notice that there is gap between the pieces once placed together then reconfigure your slider. I created the dampers mainly because my foam dampers created a slight gap and I'm extra precautious. I used the inserts while I was waiting for my brass inserts, but they are still a great insert to use.
Medium strength magnets = ~4.7mm
Strong strength magnets = ~6.4mm
Files are labeled appropriately for the magnet, check before printing
NOTE: The integrated dampers are set to the same height as the damper by itself, which is .4.