1 / 7
Akai MPC Live II 15 Degree Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for MPC Live II that angles it at 15 deg to make it more ergonomic for some users.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 211
- Wydruki
- 0
- Wyświetlenia
- 1686
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (24)Powiązane
I got frustrated with my Akai MPC Live II sitting flat on my desk. It did not seem very ergonomic to me. As a result I design a stand to sit it up at a 15 degree angle.
There are two versions of this stand included here:
- The one piece version - you will need a printer with a larger build plate to be able to print these (I used my Creality CR10)
- The two piece version - you will need to print and upper and a lower as a set to make one stand. It is possible to print this on a machine with a smaller print area one piece at a time if needed. The two pieces are designed to lock into place with the MPC unit on top. Alternatively you could glue the two pieces together to make a single stand
Note that you will need a pair of stands to support the unit stably.